Strippit Repair Parts and Repair Service on
Strippit  HECC80 CNC Control Turret Punch Press Machines.

Strippit Houdaille HECC80 Controls & Servos Are Our Specialty!
Machine Technologies Specializes in Complete Electronic
    AND
Mechanical Repair Parts
& Service, on Strippit CNC
HECC80 Control Turret Punch Press Machines.

From Early
Strippit Houdaille Hardwired NC Control FC1000 Machines,  to CNC HECC80 FC1000/3 and FC1250/30/1500 Machines,
We Have The Parts & Expertise to Help!
--------  WE PROVIDE;
---  Strippit Houdaille Electronic Repair Parts
---  Strippit Machine Mechanical Repair Parts
---  Strippit HECC80 Circuit Board Testing & Repair
---  Control RS-232 Downloading Updates & Cables
---  General Electric Servo Drive Testing & Repair
---  On-Site Electronic & Mechanical Repair Service ---  Machine & Control Installation and Start-Up
---  Machine & Control Operator Training

-- ON THE FOLLOWING PARTIAL LIST Of STRIPPIT       HECC80 CNC-CONTROL TURRET-MACHINES;
  ----  FC750
  ----  FC750/2
  ----  FC51/30
  ----  FC51/40
  ----  FC1000/1
  ----  FC1000/2
  ----  FC1000/3
  ----  FC1250/30
  ----  FC1250/45
  ----  FC1250/45/72
  ----  FC1250/30/1500
  ----  FC1250/30/1500 Laser Tool
  ----  FC1250/30/1500 Laser Center
  ----  FC1500/45 Plasma Center
  ----  Blanking Center
The Machine Technologies Co.
Strippit Repair Parts  &
Strippit HECC80 CNC Machine Service

Machine Technologies Co.
P. O.  Box  899
Matthews,  NC  28106  USA

Phone:  704 - 233 - 5229

Our  Email Address  is on the
"Contact Information"  Page.

FAX: 704-233-5405  NOTE!!!
When Faxing Us, Your Originating Fax Machine Must Provide the
CNG-Tones  (the Soft  "Beeps"  Every 4 Seconds)
or We Will Not Be Able To Receive Your Fax!
This is The Standard Set-Up.
Please See That Your Fax Machine Is Set-Up Correctly!
Please Give Us Your Strippit
Machine Model Number
AND
Machine Serial Number
When Calling Us, So That We Can Serve You Better!!!
These Numbers Are On The
Metal ID-Plate
On The Side Of Your
Machine's Frame.

Also Having the Correct
Strippit Part Number
You Need is Also Quite Helpful!
Please Note!  
Call For Our
SHIPPING ADDRESS
When Shipping Circuit Boards
In For Testing & Repairs!

You Can Not Ship
To Our P.O. Box !!!!
Tell a friend about this page
The Strippit HECC80 FC1000/3 Machine
Click-On The Above  YELLOW-BUTTONS   For More Information.
Explore!
We Now Have  39 Pages Of Strippit Information On This Web-Site!
This page was last updated: July 26, 2008
Need Help With Your
Vintage Strippit HECC80  CNC  Control Punch Machine?

Then  "Click-On"
The Damn
"Yellow-Buttons"
at  The-Left  for More Information & Help!
For Your Convenience,
We Now Take
Visa,
MasterCard,
and
American Express
Credit Cards.
Please Note!
Even if You Have Read This Web-Site Before,
You Need to Refer to it Again Frequently,
as
New Strippit Information and New Web-Pages
Are  Added  Every  Week!
Strippit FC1000/1  &  FC1000/2 Machines
Strippit FC1250/30/1500 Machines

Strippit
FC750
and
FC750/2
Machines

Jacob & I
at His Old Ship,
The 270' USCG Cutter
"Harriet Lane"

My Customer's are Loyal because I Always Show-Up with Everything Possible to Repair Their Machine.    There was a Joke,  when I was at Strippit,  that Half Their Servicemen Showed-Up at Customer's Shops with Only a Screwdriver & Their Toothbrush.   

My Philosophy has Always been Different,  and I Come Prepared.
I carry  Control Electronics Boards,  Servo Electronics,  Switches & Sensors,  Air Valves,  Servo Motors & Servo Parts,  Test Gear,  Work Tools,  Repair Books & Manuals,  I.C. Chips & Transistors,  Mechanical Machine Parts,  Nut & Bolt Hardware,  Etc.  
Everything I could Possibly Need to Fix Problems and get the Hell Done.    About  2 Tons Worth!   
That's 1 Reason I Do Not Fly for Service Work Anymore.

This Truck has been Weighted at a bit over 8000 Lbs.,  but these 
E-Series 245 -75 -16 Truck Tires are Rated for This Weight & Speed.

I Lost this Tire doing around 75 mph on Interstate 85 when it went  
"Boom!"  on 7/9/08.     It was a bit exciting.     I am going Back and see if I can Find the Tread!     Notice the Broken Front & Rear Fender Braces and the Steel Inner Fender That's Ripped Away.   

But,  This is Not the first Exploding Bridgestone - Firetone Tire for this Truck!     I have now had 5 Delaminated Belts and Blown Tires.
Note,  this Model Truck Tire was Never a Part of Firestone's Recall.

So,  I have had it for  Exploding  Bridgestone - Firestone Tires, 
and am Switching Over to Michelins.    You Should Too.